| FilmFaced Birch Plywood
Depending on item:
- Length (grain): 1220, 1500, 1525, 2440 mm
- Width: 2440, 2500, 3000, 3050 mm
- Thickness: from 6 to 40 mm
- Glue type: Phenolic (phenol- formaldehyde) and Melamine (urea-melamine-formaldehyde) resin cross bonded weather resistant according to EN 314-2
- Film Weight: 120-240 g/sq.m
- Film Color: DBO - Dark Brown Opaque
- Edges: Processing by waterproof acrylic paint
- Surface: smooth/smooth
- Strength values: FilmFaced Birch Plywood complies with the European Standards EN 13986:2002 according to EN 636-3 Plywood for use in external conditions as structural components and technical requirements 5512-011-44779728-05
FilmFaced Plywood mostly used as shuttering plywood. These panels are the best solution for formwork systems, with highest advantageous weight to straight ratio, meeting improved technical and economical requirements. Shuttering plywood can be used for various surfaced as well as in ordinary forming, small and assembled forms, wall casting, slab forms and climbing systems. For more information please move to Application
FilmFaced Wiremesh Birch Plywood
Depending on item:
- Length (grain): 1220, 1500, 1525, 2440 mm
- Width: 2440, 2500, 3000, 3050 mm
- Thickness: from 6 to 40 mm
- Glue type: Phenol-formaldehyde (WBP), Melamine (Urea-melamine-formaldehyde)
- Film Weight: 120-240 g/sq.m
- Film Color: DBO - Dark Brown Opaque
- Edges: Processing by waterproof acrylic paint
- Surface: smooth/wiremesh
- Strength values: FilmFaced Wiremesh Birch Plywood complies with the European Standards EN 13986:2002 according to EN 636-3 Plywood for use in external conditions as structural components and technical requirements 5512-011-44779728-05
This type of filmfaced plywood with wiremesh pattern is the most suitable and cost efficient solution for scaffolding and work platforms, with the highest advantageous weight to strength ratio, meeting improved technical and economical requirements. Widely used as scaffolding, transport equipment containers, loading platforms, floors for sports arenas, truck and trailer floors and playground equipments. For more information please move to Application page
Decor FilmFaced Birch Plywood
Depending on item:
- Length (grain): 1220, 1500, 1525, 2440 mm
- Width: 2440, 2500, 3000, 3050 mm
- Thickness: from 6 to 40 mm
- Glue type: Phenol-formaldehyde (WBP), Melamine (Urea-melamine-formaldehyde)
- Film Weight: 120-240 g/sq.m
- Film Color: light-brown, black-brown, grey, red-brown, green transparent, dark green, yellow transparent, blue, colorless transparent and others
- Edges: Processing by waterproof acrylic paint
- Surface: smooth/smooth; smooth/wiremesh
- Strength values: Decor FilmFaced Birch Plywood complies with the European Standards EN 13986:2002 according to EN 636-3 Plywood for use in external conditions as structural components and technical requirements 5512-011-44779728-05
This kind of product is an ideal material for application as interior wallboards, ceiling, shop fittings, transport equipment containers, side boards, panelling, sliding doors, advertising boards and play ground equipment
|
| Grades of Film Faced Plywood: F/F 1 | F/F 2 | F/W 1 | F/W 2 | Decor F/F 1 |
FilmFaced Birch Plywood F/F 1
 |
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Not allowed |
| 2. Inserted parts of the same type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 2 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 2 mm |
| 6. Hollows out of film |
Allowed by area of 0,1 cm2 inamount not more than 1 pc. on the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Not allowed |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Not allowed |
| 10. Stains out of cracks in inner plies of plywood panel |
Not allowed |
| 11. White stains and stripes on film, fired film |
Allowed with limitations |
| 12. Burnt film (burnout) |
Not allowed |
| 13. Film scratches |
Not allowed |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
| *TU 5512/011/447/79728/05 |
|
FilmFaced Birch Plywood F/F 2
|
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Allowed by wigth not more than 5 mm in case of its painting |
| 2. Inserted parts of the same type of film |
Allowed by area not more than 5cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area not more than 2cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 10 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 5 mm |
| 6. Hollows out of film |
Allowed by area not more than 5cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Allowed by size not more than 2x100 mm in amount not more than 1 pc. per 1 m of the board width in case of painting |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Allowed by size not more than 30x60 mm in amount not more than 1 pc. per 1m2 of the board side surface |
| 10. Stains out of cracks in inner plies of plywood panel |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1 m of the board width |
| 11. White stains and stripes on film, fired film |
Allowed |
| 12. Burnt film (burnout) |
Allowed |
| 13. Film scratches |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1m2of the board side surface |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
|
FilmFaced Wiremesh Birch Plywood F/W 1
 |
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Not allowed |
| 2. Inserted parts of the same type of film |
Allowed by area not more than 2cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area not more than 1cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 2 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 3 mm |
| 6. Hollows out of film |
Allowed by area of 2 cm2 inamount not more than 1 pc. on the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Not allowed |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Allowed by size not more than 10x10 mm in amount not more than 1 pc. per 1m2 of the board side surface |
| 10. Stains out of cracks in inner plies of plywood panel |
Not allowed |
| 11. White stains and stripes on film, fired film |
Allowed with limitations |
| 12. Burnt film (burnout) |
Not allowed |
| 13. Film scratches |
Not allowed |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
|
FilmFaced Wiremesh Birch Plywood F/W 2
|
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Allowed by wigth not more than 5 mm in case of its painting |
| 2. Inserted parts of the same type of film |
Allowed by area not more than 8cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area not more than 5cm2 in amount not more than 1 pc. per 1m2of the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 10 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 6 mm |
| 6. Hollows out of film |
Allowed |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Allowed by size not more than 2x100 mm in amount not more than 1 pc. per 1 m of the board width in case of painting |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Allowed by size not more than 30x60 mm in amount not more than 1 pc. per 1m2 of the board side surface |
| 10. Stains out of cracks in inner plies of plywood panel |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1 m of the board width |
| 11. White stains and stripes on film, fired film |
Allowed |
| 12. Burnt film (burnout) |
Allowed |
| 13. Film scratches |
Allowed by size not more than 2x200 mm in amount not more than 1 pc. per 1m2of the board side surface |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
|
FilmFaced Decor Birch Plywood F/F 1
|
|
| Category of defects |
Permissible amount of defects |
| 1. Film crumbling on the edges |
Not allowed |
| 2. Inserted parts of the same type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 3. Inserted parts of another type of film |
Allowed by area of 0,1 cm2 in amount not more than 1 pc. on the board side surface |
| 4. Lack of film |
Allowed by wigth not more than 2 mm in case of its painting |
| 5. Paint leaking onto board surface |
Allowed by wigth not more than 2 mm |
| 6. Hollows out of film |
Allowed by area of 0,1 cm2 inamount not more than 1 pc. on the board side surface |
| 7. Separation, blisters |
Not allowed |
| 8. Film cracks and deflections |
Not allowed |
| 9. Stains out of open knots in inner plies of plywood panel (in case of strong film polymerization) |
Not allowed |
| 10. Stains out of cracks in inner plies of plywood panel |
Not allowed |
| 11. White stains and stripes on film, fired film |
Not allowed |
| 12. Burnt film (burnout) |
Not allowed |
| 13. Film scratches |
Not allowed |
| Note: 1. Defected places are covered with water-proof paint of the same film color.conforms to Formaldehyde class emission E1. |
| *TU 5512/011/447/79728/05 |
|
|
|
